Commercial piping - Cordless Systems to increase jobsite productivity

PM 40-MG Multi-line Laser

Interior Laser - Green Beam

Multi-line laser with 3 green lines for plumbing, levelling, aligning and squaring.

Accuracy: ±2 mm at 10 m

Max. operating distance (diameter): 40 m (lines), 100 m (lines, with receiver)

Self-levelling range at room temperature: -3.0/ +3.0°     

Book a demo

PR 3-HVSG A12  Indoor Rotating Laser Level

Interior Laser - Green Beam

Indoor rotating laser with highly visible green beam

Accuracy:  ±1 mm at 10 m

Operating range with laser receiver (diameter):  2 - 150 m

Laser class:  <4.85 mW, 510-530 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040)         

Book a demo

Operation Instructions

TE 2-A 22 Volts Cordless Rotary Hammer SDS Plus

Compact, lightweight 22V cordless rotary hammer with superior handling characteristics.

Weight according to EPTA Procedure 01/2003: 2.7 kg

Optimum hammer drilling range: 4 - 12 mm

Hammer drilling diameter range: 4 - 16 mm

Read more

Operation Instructions 

TE 6-A 22 Volts Cordless Rotary Hammer SDS Plus                            

Powerful D-grip 22V cordless rotary hammer with superior concrete drilling and chipping performance.           

Weight according to EPTA Procedure 01/2003: 3.7 kg

Optimum hammer drilling range: 6 - 16 mm

Hammer drilling diameter range: 4 - 20 mm

Read more

.

Threaded Rod Suspension & Drop-in anchor                         

Use Hilti TE 2-A 22 volt cordless SDS Plus rotary hammer or 

Hilti TE 6-A 22 volt cordless SDS Plus rotary hammer

View Hilti HKD or HKV drop-in anchors, read more

If using the Hilti HKD drop-in anchor then use the Setting

Tool HKD-TE-CX you can drill holes and set the anchor with the

same tool, read more 

.

.

.

.

.

.

.

.

Cantilevers or Brackets       

Wedge anchors HST 3 read more or HST 2 read more                                   

SIW 6-AT 22 Volts Cordless Impact Wrench

Anvil type: 1/2" detent pin

Maximum torque: 90 Nm (1); 135 Nm (2); 213 Nm (3)

Nut-busting torque: 338 Nm

Bolt tension: 95 kN

Read more

SI-AT-A 22 Volts Adaptive Torque Module

Accessory type: Adaptive torque module

Weight according to EPTA Procedure 01/2003: 0.26 kg

Dimensions (LxWxH): 143 x 98 x 46 mm

Read more   

SID 2 Cordless impact driver 12 volts             

Subcompact-class 12V brushless impact driver for when you need high torque with access and low weight.                     

Chuck type: 1/4" hexagonal

Maximum torque: 180 Nm (1)

No load RPM: gear 1: 2750 rpm

Full hammering frequency: 3988 impacts/minute

Number of gears: 1

Read more

SF 2 Cordless compact drill driver 12 volts

Subcompact-class 12V brushless drill driver for when you need access, low weight and high control.

Maximum torque (soft/hard joint): 12 Nm (soft joint), 24 Nm (hard joint)

No load RPM: gear 1: 400 rpm; gear 2: 1500 rpm

Chuck clamping range: 1 - 10 mm

Number of gears: 2

Read more

SID 4 Cordless impact driver 22 volts

Compact-class 22V cordless impact driver with 1/4" hexagonal click-in chuck for medium-duty work.

Chuck type: 1/4" hexagonal click-in

Maximum torque: 60 Nm (1); 110 Nm (2); 194 Nm (3)

No load RPM: gear 1: 1000 rpm; gear 2: 1500 rpm; gear 3: 2700 rpm

Full hammering frequency: 3500 impacts/minute

Number of gears: 3

Read more

SF 4 Cordless compact drill driver 22 volts
Compact-class cordless 22V drill driver with brushless motor for when you need higher performance during light-duty tasks or in hard-to-reach places.

Maximum torque (soft/hard joint): 36 Nm (soft joint), 62 Nm (hard joint)

No load RPM: gear 1: 610 rpm; gear 2: 2100 rpm

Chuck clamping range: 2 - 13 mm

Number of gears: 2

Read more

SCM 22-A Cordless Metal Saw 22 Volts

22V cordless circular saw for fast, precise and cold cuts in metal.

Max. cutting depth: 57 mm

Blade diameter: 165 mm

Base material: Metal, Sandwich panel

Read more

TE 60-A 36 Cordless SDS Max Rotary Hammer 36 Volts             

High-performance cordless SDS Max Rotary Hammer with Active Vibration Reduction and Active Torque Control for heavy-duty drilling and chiseling in concrete. 

Functionality: Active Torque Control (ATC), Active Vibration Reduction (AVR), Chiseling, Power reduction

Optimum hammer drilling range: 18 - 40 mm

Hammer drilling diameter range: 12 - 40 mm

Weight according to EPTA Procedure 01/2003: 8.1 kg 

Rated voltage: 36 V

Read more

SL 2-A Cordless Lamp 12 Volts   (Task Light)                                                         

Cordless 12V LED task light with flexible head for illuminating confined and medium-sized work areas.     

Brightness: 500 lm

Lux: 350 lx @ 1 m

Operating time: B 12/2.6: 8.8hrs (50%), 4.5hrs (100%)

Read more

SL 2-A Cordless Lamp 22 Volts   (Task Light)

Cordless 22V LED work light for jobsites with flexible head to illuminate confined and medium-sized areas.                                                                                                 

Brightness: 500 lm

Lux: 350 lx @ 1 m

Operating time: B 22/2.6: 12hrs (50%), 6.5hrs (100%), B 22/3.0: 14hrs (50%), 7.5hrs (100%), B 22/5.2: 22.3hrs (50%), 13.6hrs (100%)

Read more

SL 6-A Cordless Lamp 22 Volts  (Area Light)

Cordless 22V LED work light with rotating head and integrated mounting options for illumination of medium to large work areas.

Brightness: 3000 lm

Lux: 2100 lx @ 1 m

Operating time: B 22/3.0: 5.2hrs (33%), 2.8hrs (66%), 1.9hrs (100%), B 22/5.2: 8.8hrs (33%), 4.3hrs (66%), 3.2hrs (100%), B 22/4.0: 6.8hrs (33%), 3.5hrs (66%), 2.5hrs (100%), B 22/8.0: 13.5hrs (33%), 7hrs (66%), 5hrs (100%)

Read more

.

.

.

.

.

.

.

.

.

.